Chimney

Do You Think that Tuckpointing a Chimney is Important?

Tuckpointing a Chimney – Nahgoc.com | A house that has a fireplace and chimney has its unique charms. The fireplace and chimney become the beautiful feature of your home design. It will increase not only the value but also the appeal of your home. It can be beneficial when you want to sell your home. Nevertheless, when you are living in it, you have the opportunity to enjoy special moments around the fire with your family.

If you want to enjoy this cozy fire moment forever, there might be a time when you have to consider tuckpointing a chimney. Your chimney cannot last forever, after all. Well, the bricks might still look great at some point but the mortar joints can be damaged. Remember, the chimney has to deal with the harsh weather condition. Moisture becomes the biggest enemy of rock masonry. You repair the damage or at least stop the process by tuckpointing your chimney.

Reasons Why Tuckpointing is Important

You can expect a long lifespan for the bricks on your chimney. The chimney and the house have been standing for a century and the brick is still fine. Unfortunately, you cannot expect the same thing from the mortar joints of the chimney. The average lifespan of the mortar is 25 years but it will depend on the exposure of the masonry chimney to harsh weather conditions especially excess water.

To avoid the problem with the mortar joints of the chimney, homeowners should install a cricket. It is highly recommended since the compact diversion roof will prevent the chimney from being exposed too much to an excessive amount of water. However, the effect of the cricket to prevent the mortar joints erosion due to rainy weather will depend on the chimney position and the roof layout.

Sometimes, the damaged mortar joints cannot be avoided. You have to face the fact that they are damaged and you need to find the solution for this problem before it gets worse. You might consider rebuilding the chimney completely but it is not cheap at all to demolish the existing chimney and build the new one. In this circumstance, tuckpointing a chimney can be chosen as the most affordable option. With this method, you will only repair the damaged area.

It sounds like an instant solution but it can help to stop the damaging process. Repairing the mortar joint will prevent your chimney from collapsing. It means you do not have to rebuild the chimney since rebuilding a chimney will be much more expensive than repairing it. Do not wait until the chimney completely collapses to consider tuckpointing it. You do not want to regret it, for sure.

How Does It Work

What is tuckpointing? You might not have any idea about how it works. The main purpose of tuckpointing is to replace the old mortar joints with the new ones. Of course, removing the damaged mortar will be one of the basic functions of tuckpointing. After removing the damaged mortar, you will replace it will the fresh one.

There are some basic steps to follow when tuckpointing a chimney. You want to route or ground the old mortar of your chimney. However, you cannot do this randomly. You need to make sure that the depth after mortar removal is uniform. Now, the grooves are ready to be filled with red mortar. Do not forget to form grooves. You can do it by cutting down the thin strips in the middle of the applied mortar.

People love the chimney because it has an aesthetic effect on their houses. You do not want to ruin the overall look by having different mortar color. The original mortar applied on the outside of the chimney structure cannot be changed. However, you can make sure that the color of mortar used for filling in the grooves must match the original one. This way, your chimney will look fabulous. You do not have to worry that it will collapse any longer. You can enjoy your fireplace and chimney to the fullest.

Advantages of Tuckpointing

If you want to make your chimney last longer, you have no choice but to do this method. The procedure of tuckpointing a chimney will preserve your chimney life. It might sound too simple for you but tuckpointing your chimney can offer various benefits. It will make you just want to do the tuckpointing procedure right away

The weakest part of your masonry chimney is the mortar joints. With high water exposure to the chimney since it has direct contact with open air, the mortar joints can get damaged more. If you do not do anything, the mortar joints corrosion will occur again and again. This circumstance can lead to the collapse of the chimney. You do not have to wait until this tragedy happens because you can choose tuckpointing your chimney to stop the mortar joints corrosion.

You need to keep your chimney structure stable if you want to prevent it from leaning or even collapsing. Unfortunately, it will not do if you do not repair your chimney mortar joints. The chimney structure will get weak without tuckpointing. If you want to restore the stability of your chimney structure, tuckpointing is the right answer.

Damaged mortar joints of your chimney can lead to various problems. Many of them are invisible that makes you unable to realize it until a fatal problem occurs. Why can this happen? The damaged mortar joints will be free access for water to seep down your chimney. Sometimes it gets even further between the flue lining and your chimney. You cannot see it but there might be rotting wood, mildew, or mold in the chimney. You might also find some stains on the wallpaper and ceiling around the chimney.

This problem can be stopped or avoided by tuckpointing. The fresh mortar applied on the brick joints of your chimney will not allow water to enter your chimney system. No water means no moisture and no moisture means no problem.

How much money do you have to spend if you have to tear your current chimney down and build a new one? It will be a lot of money needed since you have to replace the entire structure of the chimney. By tuckpointing the chimney, your money spending will be much more effective.

You might not rebuild your chimney but tuckpointing will give you a chimney that looks like its original condition but with better performance, for sure. Tuckpointing your chimney means that you restore the masonry chimney material. It looks new although it is not brand new.

With the masonry in its top condition because of tuckpointing, it can affect more than just the chimney. Your whole house will get great influence as well. You can improve your home value simply by repairing the mason joints.

Tuckpointing Types

Is there any different type of tuckpointing? Yes, you can find two types of tuckpointing. The first one is spot pointing. You might think that it is not a type of tuckpointing because of its name but it is short for spot tuckpointing, after all. This tuckpointing type will be applied on a smaller scale. The second one is solid tuckpointing. It is simply called tuckpointing often. Let’s find out about them further.

Spot Point

The main purpose of spot pointing is to address main open holes and settle cracks throughout a solid wall. It is applied to plug up the hole to prevent rapid corrosion. You can choose this method especially when you think that it is impractical to tuckpointing the entire wall. When you think that solid tuckpointing is not effective in the budget aspect, you can consider spot tuckpointing.

When should you consider spot pointing instead of solid tuckpointing? When talking about chimney repair, you might want to consider spot pointing when you want to repair minor holes or cracks on your chimney that has been tuckpointed within the last 15 years. If there are specific areas of your chimney with cracks and holes due to a specific problem especially associated with water, you can choose this option.

There might be a time when you want to sell your house. There is no doubt that this event can be very stressful. You do not want to add your stress by choosing solid tuckpointing because you cannot afford it. Some tuckpointing areas in your chimney might be bad. The inspectors will help you to point them out. It is recommended to do spot pointing. In this circumstance, you will find it reasonable to avoid solid tuckpointing, after all.

When talking about tuckpointing a chimney, you might have to consider this option as an affordable chimney repair. You have to spend much more money to rebuild your chimney when it is too damaged. However, it does not mean that everyone can afford solid tuckpointing as well. Solid tuckpointing can come with unexpected expenses. You might have another situation to handle that makes you unable to pay for solid tuckpointing.

Of course, spot tuckpointing will not always be the right choice for your situation. Some conditions make you need to avoid spot pointing. When you have money and your chimney needs solid tuckpointing, you should go for solid tuckpointing, for sure. You might realize that it will not be cost-effective at all if you have to patch something over and over again. You can save a lot of money by simply replacing it at once. Your chimney will not look good as well with too many patched areas.

Solid Tuckpointing

Compared to spot pointing, solid tuckpointing will cost more because you need to remove the mortar joints throughout the entire chimney wall. You have to clean the joint before installing a new mortar. However, you do not have to do this often. Tuckpointing will be necessary once in 20-30 years or even more. The original mortar of your chimney can even last for more than 50 years under different circumstances. Meanwhile, the mortar of your tuckpointed chimney can last more than 25 years.

Several factors will affect the lifespan of your tuckpointing, after all. The largest factor that will affect how long tuckpointing will last is the quality of work. You need to hire someone who knows how and why you need to tuckpointing your chimney to make sure that the mortar can last longer. There will be no room or at least very little room for error.

However, you have to remember that your chimney and your indoor wall will have completely different circumstances associated with weather and water exposure. Your chimney has much greater exposure to both conditions than your indoor walls. That is why the tuckpointing of your chimney might not last as one for your indoor walls.

You cannot separate the lifespan of your mortar for your chimney tuckpointing from the type of mortar as well as additives used. Every single material used for mixing the mortar will play an important role that will affect the lifespan of your tuckpointed chimney. If you want to make sure that you do not need chimney tuckpointing too soon, you have to make sure that the mortar mix comes with the best quality materials.

When you think that the weather in your area is pretty harsh for your chimney and you want to make it look better, solid tuckpointing might be necessary. You can start looking for qualified professionals to do the job to make sure that the tuckpointed chimney can last longer. The professional must have experience, reputation, and reliability. Do not forget about affordability as well. It is also crucial to choose a tuckpointing professional who is insured or licensed for everyone’s safety.

Do you think that you always need solid tuckpointing your chimney to get the best result? Well, solid tuckpointing is not always the best answer for every chimney problem, of course. It will not always be the best cure for all. You should not consider tuckpointing a chimney when your chimney is still in a solid condition Even when there are only a few areas that need repairmen, you should not just go for tuckpointing.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button